Only One AirPod Is Working — Apple's Steps, in Order
Apple's ten steps for no sound in one AirPod
This is the whole of Apple's page, "If your left or right AirPod isn't working," in Apple's order:
- Make sure that your charging case is fully charged. (If your case isn't charging, Apple's page links to its charging steps for that problem.)
- Clean the charging port of your AirPods charging case or your AirPods Pro charging case.
- Place both AirPods in your charging case and let them charge for 30 seconds.
- Open the charging case near your iPhone or iPad.
- Check the charge status on your iPhone or iPad to make sure that each AirPod is charging.
- Put the AirPod that isn't working in the appropriate ear.
- With the other AirPod still in the charging case, close the lid of the case.
- Make sure that your AirPods are connected to your iPhone or iPad.
- Play audio to test the malfunctioning AirPod.
- Depending on what happens:
- If the malfunctioning AirPod plays sound, place both AirPods in the charging case, let them charge for 30 seconds, open the charging case near your iPhone or iPad, and test to see if both are now working properly.
- If an AirPod still isn't working, reset your AirPods. (If you just replaced an AirPod, Apple's page sends you instead to set up your replacement AirPod.)
Notice the shape of Apple's sequence: the charge status check in step 5 comes before any conclusion about sound — a silent AirPod that never charged is a charging problem, and Apple's page makes you look at the charge state of each AirPod individually before it lets the problem be about audio at all.
If one side is only quiet — Apple's separate branch
Apple treats "too quiet in one of your AirPods" as a different problem with its own five steps:
- Remove your AirPods ear tips to check the microphone and speaker mesh on each AirPod.
- If there's any debris, clean your AirPods or your AirPods Pro (Apple's page links to its cleaning instructions for the method).
- Go to the Settings app, then tap Accessibility.
- Tap Audio & Visual, then scroll down to Balance.
- Make sure that the Balance slider is set in the middle.
The blogs that rank for this problem merge the two branches together and usually put cleaning first. Apple's page keeps them apart: the mesh check and the Balance slider belong to the quiet problem; the silent problem starts at the case and the charge.
If Apple's test fails — the reset, exactly as Apple prints it
Apple's step 10 ends at "reset your AirPods," and Apple's reset article gives the sequence. The first steps are the same for every model:
- Put your AirPods in their charging case, close the lid, and wait 30 seconds.
- On an iPhone or iPad that's paired with your AirPods, go to Settings, then tap Bluetooth. If your AirPods appear in the My Devices list, tap the More Info button next to your AirPods, tap Forget This Device, then tap again to confirm. If they don't appear in the list, continue to the next step.
- Open the lid of your charging case.
Then the gesture splits by model — this is the part the older blog posts get wrong, because the newer models have no setup button to hold:
- AirPods 1, 2, or 3, or AirPods Pro 1 or 2: press and hold the setup button on the back of the case for about 15 seconds. When the status light on the front of the case flashes amber, then flashes white, follow the steps on your device's screen to reconnect your AirPods.
- AirPods 4 or 5, or AirPods Pro 3: double-tap the front of the case while the status light is on; double-tap again when the status light flashes white; double-tap a third time when the status light flashes faster. When the status light flashes amber, then flashes white, follow the steps on your device's screen to reconnect.
And if the status light doesn't flash white when you reset, Apple's article has a retry: put the AirPods in the charging case and close the lid for 20 seconds; open the lid; then repeat your model's gesture (the setup-button hold again, or the double-taps again). To reconnect afterwards: with the AirPods in the case and the lid open, place them close to your device and follow the steps on the screen.
What this page deliberately doesn't print
Two ranking-page staples are absent from Apple's pages and absent here: the per-model replacement prices ($69 / $89 for a single AirPod) printed by blogs — no Apple page read for this guide states a price, so none is printed — and the "reset your iPhone's network settings" step, which appears in blog fix-lists but nowhere in Apple's sequence for this problem. Apple's page ends where it ends: if the charge check, the solo test, and the reset have all had their turn, the remaining route is Apple Support, which is also where a replacement AirPod gets set up.
The bottom line: charge first, the way Apple orders it — case full, port clean, 30 seconds, each AirPod seen charging — then the solo test with its partner in the closed case. Quiet instead of silent is a different page of Apple's book: mesh, clean, Balance in the middle. Reset last, with the gesture your model actually uses.
Sources
Apple Support — "If your left or right AirPod isn't working" (support.apple.com, article 100494; published date September 14, 2026). Read in full. The page, complete: 1. Make sure that your charging case is fully charged (with a link to charging steps if the case isn't charging). 2. Clean the charging port of your AirPods charging case or your AirPods Pro charging case. 3. Place both AirPods in your charging case and let them charge for 30 seconds. 4. Open the charging case near your iPhone or iPad. 5. Check the charge status on your iPhone or iPad to make sure that each AirPod is charging. 6. Put the AirPod that isn't working in the appropriate ear. 7. With the other AirPod still in the charging case, close the lid of the case. 8. Make sure that your AirPods are connected to your iPhone or iPad. 9. Play audio to test the malfunctioning AirPod. 10. If the malfunctioning AirPod plays sound: place both AirPods in the charging case, let them charge for 30 seconds, open the charging case near your iPhone or iPad, and test to see if both are now working properly. If an AirPod still isn't working: reset your AirPods; if you just replaced an AirPod, set up your replacement AirPod. Then, for "the volume is too quiet in one of your AirPods": 1. Remove your AirPods ear tips to check the microphone and speaker mesh on each AirPod. 2. If there's any debris, clean your AirPods or your AirPods Pro. 3. Go to the Settings app, then tap Accessibility. 4. Tap Audio & Visual, then scroll down to Balance. 5. Make sure that the Balance slider is set in the middle. https://support.apple.com/en-kg/100494 (the article as read; Apple publishes the same article across its regional support sites).
Apple Support — "How to reset your AirPods and AirPods Pro" (support.apple.com, article 118531; published date October 13, 2026). Read in full. Shared first steps: put your AirPods in their charging case, close the lid, and wait 30 seconds; on an iPhone or iPad paired with your AirPods, go to Settings, then tap Bluetooth — if your AirPods appear in the My Devices list, tap the More Info button next to your AirPods, tap Forget This Device, then tap again to confirm; if they don't appear, continue; open the lid of your charging case. For AirPods 1, 2, or 3 and AirPods Pro 1 or 2: press and hold the setup button on the back of the case for about 15 seconds; when the status light on the front of the case flashes amber, then flashes white, follow the steps on your device's screen to reconnect. For AirPods 4 (all models), AirPods 5 (both models), and AirPods Pro 3: double-tap the front of the case while the status light is on; double-tap again when the status light flashes white; double-tap a third time when the status light flashes faster; when the status light flashes amber, then flashes white, follow the steps on your device's screen to reconnect. If the status light doesn't flash white when you reset: put the AirPods in the charging case and close the lid for 20 seconds; open the lid; repeat the model gesture; then, to reconnect, place the AirPods (in their case, lid open) close to your device and follow the steps on the screen. https://support.apple.com/en-ph/118531 (the article as read; Apple publishes the same article across its regional support sites).
Checked November 7, 2026.
Related guides: DOSBox Joystick Not Working or Drifting, DOSBox IPX Multiplayer, iPhone Stuck on the Apple Logo, Chromebook Won't Turn On or Charge and What is a VPN.