DOSBox IPX Multiplayer: Two Computers, One Game — In Plain Words
ipx=true in the [ipx] section, on every computer. Two: the player hosting the game types IPXNET STARTSERVER at the DOSBox prompt. Three: every other player types IPXNET CONNECT followed by the host’s address. Then start the game on each machine and choose its network or IPX option. DOSBox carries the old IPX network protocol over a modern connection, on your home network or across the internet.
Honest labels, up front. Every command and setting on this page is copied from the DOSBox manual, the DOSBox Wiki, and — in one clearly marked section — the DOSBox Staging manual, which describes a different program and is never blended with the DOSBox 0.74 directions. This page covers the DOSBox layer only; each game’s own network setup screen is that game’s business. Nothing here was tested by playing a game for this page: the DisBox settings collection this page belongs to holds 0 settings verified by actual play.
These settings are part of the DisBox collection. DisBox OS — the system being built to run games with settings like these — is in the works; its interface comes first, so there is no finished OS to download yet.
Step 1: turn IPX on
The manual’s IPX section opens with the requirement: “You need to enable IPX networking in the configuration file of DOSBox.” The DOSBox Wiki’s dosbox.conf page shows the switch — in the [ipx] section:
[ipx] ipx=true
The Wiki notes the default is false, so nothing connects until you change it — on the host’s machine and on every player’s machine. Save the file and restart DOSBox after editing.
Step 2: one player starts the server
All IPX networking in DOSBox is managed through one built-in program, IPXNET. Typing IPXNET HELP at the DOSBox prompt lists its commands. The host starts the server:
IPXNET STARTSERVER
The manual explains what that does: the command “starts an IPX server on this DOSBox session” and the server “will accept IPX-network connections from any client address.” You can add a port number — IPXNET STARTSERVER 19900, for example — and if you leave it out, the default is UDP port 213, which the manual notes is “the assigned IANA port for IPX tunneling.” Everyone else plays through this one server — clients do not connect to each other directly.
Step 3: the other players connect
IPXNET CONNECT 192.168.1.20
Replace the address with the host’s — the manual says it “can be an actual IP address or a host name,” and if the host chose a non-default port, add it after the address. A connected client sees the message “IPX Tunneling Client connected to server at…” — that message is your proof the DOSBox layer is working, before the game enters into it. Two limits from the manual: a client “can only connect to one server at a time,” and the server should be left running for the whole session — see the warning below.
Then start the game — and one special case
With every machine connected, start the game on each computer and pick the game’s own network, LAN or IPX option inside the game. If the game cannot see the other players at that point, the problem is inside the game’s setup, not in DOSBox — the connection check below proves which side is at fault.
The manual flags one special case: “For Netbios games, DOSBox requires NETBIOS.EXE to be run in DOSBox” first. That file is Novell’s, not part of DOSBox — a game that asks for Netbios needs it loaded before the game starts.
Checking the connection
IPXNET STATUS— “shows the current state of the IPX network tunnel.” Run it on a client if you are not sure you are connected.IPXNET PING— “broadcasts a ping to all IPX networks.” Every computer that answers is listed, which proves the tunnel reaches other machines even before any game is started.IPXNET DISCONNECT— disconnects a client from its server. On the server machine it disconnects all clients; if no clients remain, the server stops.
One warning, in the manual’s own words, about shutting the server down mid-session: the IPXNET STOPSERVER command “may result in lockups of other connected clients and DOSBox instances.” End the game first, then close DOSBox.
If your game is a two-player serial game instead
Some head-to-head games never used IPX — they played over a modem or a null-modem cable, and DOSBox handles those on its serial ports instead. The manual’s serial setup, in brief: set serial1=nullmodem in the configuration file on both machines; on the client’s machine, add the host’s address — serial1=nullmodem server:192.168.1.20. The manual’s rules: the TCP port defaults to 23 and can be set with port:; both in-game baud rates must be the same; and in the game itself, choose the nullmodem or serial option and COM1 on both sides. If a game offers both kinds of play, IPX (above) is the one built for more than two players.
If you run DOSBox Staging instead
DOSBox Staging is a separate program; its own manual describes the same shape of setup, printed here as Staging’s documented behaviour. The IPXNET STARTSERVER and IPXNET CONNECT <address> commands are the same, and Staging likewise tunnels IPX over UDP/IP. The switch is spelled differently in its configuration file: in the [ipx] section, ipx = on (the default is off). Staging’s multiplayer page also points hosts at the usual answer when a port cannot be reached through a router — forward that one port, or have both players join the same virtual network (it names VPN tools such as ZeroTier or Tailscale) and connect with the addresses those give you.
The one-minute version: ipx=true in every player’s config file. Host: IPXNET STARTSERVER (UDP port 213 unless you pick another — if nobody can reach the host, the port-forwarding note in the Staging section below is the usual answer). Everyone else: IPXNET CONNECT plus the host’s address. Look for the “IPX Tunneling Client connected” message, prove it with IPXNET PING, then start the game and choose its IPX option on every machine. Leave the server running until the game is over — stopping it can lock up the other players.
Sources
DOSBox (dosbox.com) — “DOSBox v0.74-3 Manual” — Section 4 (the IPX section: IPX must be enabled in the configuration file; all IPX networking is managed through IPXNET; the full IPXNET reference — STARTSERVER and its default UDP port 213, the IANA port for IPX tunneling, and accepting connections from any client address; CONNECT with an IP address or host name, one server at a time, and the “IPX Tunneling Client connected to server at…” message; PING broadcasts and lists answering computers; STATUS shows the tunnel state; DISCONNECT behaviour; the STOPSERVER lockup warning; NETBIOS.EXE required for Netbios games) and Section 9 (serial multiplayer: serial1=nullmodem, the client’s server: parameter, TCP port default 23, matching baud rates, choosing nullmodem/serial and COM1 in the game). https://www.dosbox.com/DOSBoxManual.html
DOSBox Wiki — “Dosbox.conf” — the [ipx] section: ipx=true/false, default false. https://www.dosbox.com/wiki/Dosbox.conf
DOSBox Staging — “Multiplayer” and “IPX” manual pages — IPX tunnelled over UDP/IP, the same IPXNET STARTSERVER and CONNECT commands, the [ipx] ipx = on/off setting with off as the default, and the port-forwarding / virtual-network advice for hosts. Staging is a separate program; its facts are labelled as such on this page. https://www.dosbox-staging.org/0.83/manual/networking/multiplayer/ and https://www.dosbox-staging.org/0.83/manual/networking/ipx/
Checked November 7, 2026
Related guides: Game Runs Too Fast in DOSBox? Fix the Cycles, Only One AirPod Is Working, DOSBox CPU Core, DOSBox Cycles for DOOM and DOOM II and DOSBox Fullscreen Black Screen Fix.