Roland MT-32 Music in DOSBox: What Actually Works
MIXER /LISTMIDI and the midiconfig= line. DOSBox Staging is the build with an MT-32 built in — but it needs Roland’s ROM files, which are copyrighted and cannot be bundled with the program, so you have to supply your own.
Honest labels, up front. DOSBox 0.74, DOSBox Staging and DOSBox-X are three different programs with three different MT-32 stories, and most confusing guides mix them together. This page keeps them in separate, labelled sections and never blends a setting from one into another. Everything is copied from the programs’ own manuals and wikis, listed in the Sources box. Nothing here was tested by playing a game for this page: the DisBox settings collection this page belongs to holds 0 settings verified by actual play.
These settings are part of the DisBox collection. DisBox OS — the system being built to run games with settings like these — is in the works; its interface comes first, so there is no finished OS to download yet.
First, what the game is asking for
Games of the MT-32 era send their music out as MIDI — instructions, not recorded sound — through an interface card called the MPU-401. DOSBox emulates that interface, not the instrument behind it. The manual’s FAQ puts it plainly: “A MIDI passthrough interface is also emulated. This method of sound output will only work when used with external device/emulator.” The same answer explains why most people hear something without doing anything: “Every Windows XP/Vista/7 and MAC OS has got a default emulator compatible with: Sound Canvas/SCC/General Standard/General MIDI/Wave Blaster. A different device/emulator is needed for Roland LAPC/CM-32L/MT-32 compatibility.”
So if you choose “Roland MT-32” in a game’s setup while DOSBox is passing MIDI to your computer’s built-in General MIDI synth, the music plays — but with the wrong instruments, because the synth at the other end is not an MT-32. That mismatch, not a broken setting, is the usual story behind “MT-32 music sounds wrong.”
Plain DOSBox 0.74: the three [midi] settings
The DOSBox Wiki’s dosbox.conf page lists exactly what the [midi] section of DOSBox 0.74 offers:
mpu401 = intelligent | uart | none— which kind of MPU-401 DOSBox emulates.intelligentis the full mode;uartreduces the interface to just relaying MIDI data in and out;noneturns MIDI off. DOSBox Staging’s MT-32 page notes that most MT-32 games — including all older Sierra and Legend Entertainment adventures — need the interface’s Intelligent Mode, and that it is safe to leavempu401at its defaultintelligentsetting for most MT-32 games.mididevice— the Wiki is frank that the name misleads: it is “not so much which MIDI device to use as which MIDI interface to use,” because “DOSBox currently does not emulate MIDI, but instead passes it through to an interface.” The values aredefault,win32,alsa,oss,coreaudio,coremidiandnone. Notice what is not in that list: there is nomt32value in DOSBox 0.74. Any guide that tells you to setmididevice=mt32in plain DOSBox is describing a different program.midiconfig— the ID number of the specific MIDI device to play on. How you find that number is the next section.
If a game’s own setup program asks for the MPU-401’s address and interrupt, the manual’s FAQ sound list gives the music device (Sound Canvas/SCC/MPU-401/General MIDI) at address 330, IRQ 2.
Choosing the device: MIXER /LISTMIDI
At the DOSBox prompt, type:
MIXER /LISTMIDI
The manual’s MIXER entry: “In Windows lists the available midi devices on your PC. To select a device other than the Windows default midi-mapper, change the line ‘midiconfig=’ in the [midi] section of the configuration file to ‘midiconfig=id’, where ‘id’ is the number for the device as listed by LISTMIDI. eg. midiconfig=2.” On Linux, the manual says the same job is done from the console with pmidi -l, and the value takes the port form — its example is midiconfig=128:0.
That list is also where a real MT-32 or an MT-32 emulator program shows up once it is running on your computer: if it is not in the list, DOSBox cannot send music to it, and no config edit will change that.
DOSBox Staging: the MT-32 is built in, the ROMs are not
DOSBox Staging is a separate program. Its manual has a full Roland MT-32 page, and the setup is genuinely different — printed here as Staging’s documented behaviour. Staging emulates the MT-32 itself, switched on with one line:
[midi] mididevice = mt32
But the emulation needs the original ROM data from the hardware. Staging’s warning, in its own words: “Emulating the Roland MT-32 requires the original ROM data from the hardware itself — the MT-32 MIDI device cannot function without these files. We can’t bundle the ROM files with our release packages due to copyright restrictions, so you’ll need to obtain and install them yourself.” Its legal notes add that the ROM images are copyrighted by Roland Corporation. This page prints no download route for them: they are Roland’s copyrighted property, and Staging’s own position is only that you obtain and install them yourself.
Staging looks for the ROM files in an mt32-roms folder — inside its configuration folder (on Windows, its lookup list gives C:\Users\<USERNAME>\AppData\Local\DOSBox\mt32-roms\), or in an mt32-roms subfolder of the game’s own folder, or in a folder you name with the romdir setting. Both the control and PCM ROMs for a model must be present. In the [mt32] section, the model setting chooses which hardware revision to be: auto is the default and prefers the CM-32L when its ROMs are available; mt32_old picks the best v1.0x set — Staging’s rule of thumb is that early Sierra games from 1988–1990 were composed on the old hardware and generally sound more authentic on it — while mt32_new picks v2.0x, and cm32l asks for the CM-32L outright (the 1989 gaming variant with 33 extra sound effects some games use). Running MIXER /LISTMIDI in Staging lists the models it found, with the active one highlighted. And the mpu401 point above applies here too: Staging says to leave it at its default intelligent for most MT-32 games.
About DOSBox-X
DOSBox-X is a third program again, with its own built-in MT-32 and its own setting names. Guides written for it — including its own MT-32 guide — describe configuration lines that exist only there. If a page’s instructions mention settings you cannot find in your DOSBox’s configuration file at all, this is almost always why: the instructions were written for a different build than the one you are running.
The one-minute version: In plain DOSBox 0.74 there is no MT-32 to switch on — DOSBox passes the game’s MIDI to a device on your computer. Run MIXER /LISTMIDI, put the number of your MT-32 (real or emulator program) into midiconfig= in the [midi] section, leave mpu401 at intelligent, and choose MT-32 in the game’s setup. In DOSBox Staging, add mididevice = mt32 and supply your own ROM files in its mt32-roms folder — they are Roland’s copyrighted property and are never bundled. A mididevice=mt32 line in a plain-DOSBox guide means the guide is about a different program.
Sources
DOSBox (dosbox.com) — “DOSBox v0.74-3 Manual” — the FAQ sound answers (the MIDI passthrough interface: “A MIDI passthrough interface is also emulated. This method of sound output will only work when used with external device/emulator”; every Windows XP/Vista/7 and Mac OS has a default emulator compatible with Sound Canvas/SCC/General MIDI/Wave Blaster; a different device/emulator is needed for Roland LAPC/CM-32L/MT-32 compatibility; the music device at address 330, IRQ 2) and Section 4 (MIXER /LISTMIDI: listing Windows MIDI devices, midiconfig=id with the example midiconfig=2, and on Linux pmidi -l with the example midiconfig=128:0). https://www.dosbox.com/DOSBoxManual.html
DOSBox Wiki — “Dosbox.conf” — the [midi] section: mpu401 = intelligent | uart | none and what each mode does; mididevice = default | win32 | alsa | oss | coreaudio | coremidi | none, explained as which interface MIDI is passed through to, since DOSBox does not emulate MIDI; midiconfig as the ID of the MIDI device, found with MIXER /LISTMIDI or pmidi -l. No mt32 value exists in this list for DOSBox 0.74. https://www.dosbox.com/wiki/Dosbox.conf
DOSBox Staging — “Roland MT-32” manual page — mididevice = mt32 in [midi]; the ROM requirement and the copyright wording (“We can’t bundle the ROM files with our release packages due to copyright restrictions”); the legal notes (ROM images copyrighted by Roland Corporation); the mt32-roms lookup paths, including the Windows path quoted on this page; both control and PCM ROMs required per model; the [mt32] model setting (auto preferring the CM-32L, mt32_old, mt32_new, cm32l and the extra CM-32L sound effects); the 1988–1990 early-Sierra rule of thumb; MIXER /LISTMIDI listing models; and mpu401’s default intelligent mode being what most MT-32 games need. Staging is a separate program; its facts are labelled as such on this page. https://www.dosbox-staging.org/0.83/manual/sound/sound-devices/roland-mt-32/
Checked November 7, 2026
Related guides: Gravis UltraSound in DOSBox, DOSBox Memory, EMS and XMS, DOSBox Output, DOSBox Save States and DOSBox Scalers and Aspect Correction.