Refrigerator Dial Numbers: Which Way Is Colder?
General information only — not a substitute for your own refrigerator's manual. This page quotes GE's manual because GE prints the rule in one plain sentence. Most numbered dials work the same way, but your brand's manual is the authority for your fridge.
Nothing here is a repair. This page is about reading a dial and checking a temperature — no panels, no parts, no wiring.
The rule, straight from the manual
GE's refrigerator manual (publication 49-60634-1) has a short section headed "Control Settings," and it settles the question in three sentences:
- "1 is the warmest setting; higher numbers are colder settings with 7 being the coldest setting."
- "The typical setting is 3."
- The arrow on the dial indicates the setting you have selected.
So on a 1-to-5 dial, 5 is the coldest and 1 is the warmest. On a 1-to-7 dial, 7 is the coldest. Turning the number up turns the cold up. If your fridge is too warm, you go to a higher number, not a lower one.
Watch out: a popular website has this backwards. One refrigerator-manual help site runs an article titled "Lower Numbers Mean Colder" — and it is wrong. The same page even argues against itself: it also says a lower number means the compressor runs less often, and a compressor that runs less makes a fridge warmer, not colder. Another article on the very same site says the opposite — that a higher number means colder — which matches GE's manual. When two pages on one site disagree, believe the appliance maker's own manual: higher number, colder fridge.
The numbers are not degrees
A dial set to 3 is not set to any temperature at all. It is a step on a scale, and two different fridges — or the same fridge in a hot kitchen and a cold one — can sit at different real temperatures on the same number. GE notes one side effect: setting the control too high may cause freezing in the refrigerator, depending on the room temperature. That is the dial doing exactly what you told it to do.
So the dial question has two halves: which way is colder (answered above), and what temperature you actually have. For the second half you need a thermometer.
Check the real temperature (the USDA way)
The USDA's Food Safety and Inspection Service (FSIS) publishes the standard method, using an inexpensive appliance thermometer — the kind made to hang from a rack or sit on a shelf:
- Refrigerator: put the thermometer in a glass of water and place it in the middle of the refrigerator. Wait 5 to 8 hours. If the temperature is not 38 to 40 °F, adjust the control — then check again after another 5 to 8 hours. For safety, the refrigerator should maintain a temperature no higher than 40 °F.
- Freezer: place the thermometer between frozen food packages. Wait 5 to 8 hours. If it is not 0 to 2 °F, adjust and check again. Frozen food holds its top quality longest when the freezer maintains 0 °F.
FSIS also suggests keeping a thermometer in the fridge and freezer at all times. That pays off after a power outage: when the power comes back, if the refrigerator is still at 40 °F and the freezer at 0 °F or below, the food is safe.
Why the 40 °F line matters: FSIS notes that harmful bacteria grow very slowly below 40 °F and multiply rapidly between 40 and 140 °F. A fridge quietly running at 45 °F is not a small problem.
Adjust the slow way
GE's manual gives the adjusting rules, and they are mostly about patience:
- Move the dial one setting at a time.
- Allow 24 hours for the refrigerator to reach the temperature you have set before you judge the change and move it again.
- GE's own quick check is the milk test: place a container of milk on a shelf and check it a day later; if the milk is too warm or too cold, adjust the control.
Jumping two or three numbers at once is how milk freezes or food spoils — you overshoot, correct the other way, and never learn what any single setting does.
Two more things the dial does
- 0 is "cooling off," not "power off." GE: moving the control to 0 stops cooling but does not turn off the power to the refrigerator. The light still works; the cold does not. If you set 0 by accident, the fridge will warm up while looking perfectly normal.
- Too high can freeze the fresh-food side. As GE warns, a very high setting may cause freezing in the refrigerator section, depending on room temperature.
If your fridge is different
Some refrigerators show actual degrees on a digital display, some use words (cold / colder / coldest), and some have separate controls for the fridge and the freezer. Those are different controls from the numbered dial this page is about. The rules that carry over are the thermometer check and the targets: 38–40 °F in the fridge, 0 °F in the freezer, verified after a 5-to-8-hour wait. Your own manual is the authority for your model's controls.
General information only — not a substitute for your own refrigerator's manual. If your fridge cannot hold 40 °F even on its coldest sensible setting, that is no longer a dial question — it is a service call. The manual and the USDA page below are the whole basis of this guide, and both are short reads in the original.
Sources
GE Appliances, refrigerator owner's manual (publication 49-60634-1), "Control Settings" and "How to Test Temperatures": the temperature control maintains the temperature in the refrigerator; 1 is the warmest setting; higher numbers are colder settings with 7 being the coldest setting; the typical setting is 3; allow 24 hours for the refrigerator to reach the desired temperature; if you want a colder or warmer temperature, move the dial one setting at a time; moving the control to 0 stops cooling but does not turn off the power to the refrigerator; setting the control too high may cause freezing in the refrigerator depending on the room temperature; the milk test — place a container of milk on a shelf and check it a day later, adjusting the control if the milk is too warm or too cold. Manual text read in full November 7, 2026 (publisher's manual reprint).
USDA Food Safety and Inspection Service (FSIS), "Appliance Thermometers" (fsis.usda.gov): pathogenic microorganisms grow very slowly at temperatures below 40 °F, multiply rapidly between 40 and 140 °F, and are destroyed above 140 °F; refrigerators should maintain a temperature no higher than 40 °F; frozen food holds its top quality longest when the freezer maintains 0 °F; to measure the refrigerator, put the thermometer in a glass of water in the middle of the refrigerator and wait 5 to 8 hours — if the temperature is not 38 to 40 °F, adjust the control and check again after 5 to 8 hours; to measure the freezer, place the thermometer between frozen food packages and wait 5 to 8 hours — if it is not 0 to 2 °F, adjust and recheck; an appliance thermometer can be kept in the refrigerator and freezer to monitor at all times, and after an outage, if the refrigerator is still 40 °F and the freezer 0 °F or below, the food is safe. Read in full November 7, 2026.
The "lower numbers mean colder" claim discussed in the watch-out box appears in an article of that title on a refrigerator-manual help website; the same page states that a lower number means the compressor runs less often, and a second article on the same site states that a higher number means a colder setting. The conflict is printed here attributed, as found November 7, 2026; GE's manual is the authority this page follows.
Checked November 7, 2026.
Related guides: Pilot Hole Sizes for Wood Screws, Refrigerator Not Cooling, Sewing Thread Bunching Underneath, Smoke Alarm Keeps Chirping After a New Battery and Thermostat Screen Is Blank.