Answered Plainly
Display: Text size:

Paid by the Piece — How Piece-Rate Pay and Overtime Work

Short answer: Being paid by the piece does not remove overtime. Under the federal regulation (29 CFR § 778.111), the pieceworker's overtime is figured from the whole week: add together everything earned that week — piece earnings, production bonuses, and pay for waiting time — and divide by the total hours worked. That gives the week's regular rate. For each hour over 40, the worker is owed an extra one-half of that regular rate — only half, because the piece earnings have already paid straight time for every hour, overtime hours included. A second, agreed-in-advance method exists and is explained below. All figures on this page are the regulation's own.

General information only — this page is not legal advice. It explains a federal regulation's arithmetic in plain words. Whether your own paycheck followed it is a question the Wage and Hour Division can look at (1-866-487-9243).

The regular rate for a pieceworker

Section 778.111(a) of the federal overtime regulations states the method. When an employee is employed on a piece-rate basis, the regular hourly rate of pay is computed by adding together:

— everything except payments the law excludes (statutory exclusions) — and dividing that sum by the number of hours worked in the week. The result is the pieceworker's regular rate for that week. It is a new number every week, because it follows that week's earnings and hours.

For overtime, the worker is entitled to that total weekly pay plus one-half the regular rate for each hour worked over 40. The regulation is explicit about why only half is added: "Only additional half-time pay is required in such cases where the employee has already received straight-time compensation at piece rates or by supplementary payments for all hours worked."

The regulation's own worked example

These are § 778.111's figures, not this page's invention:

Try the arithmetic

This checker runs the regulation's standard method above — the same steps, so the regulation's example (piece earnings $491, other pay $32, 50 hours) comes out at its printed $575.30. It figures one workweek at a time, exactly as the regulation does.

If piece pay comes with a minimum hourly guarantee

Section 778.111(b) covers piece rates coupled with a minimum hourly guaranty. Where the week's piece earnings fall short of what the total hours would earn at the guaranteed rate, the employee is paid the difference — and in such weeks, the regulation says, the employee "is in fact paid at an hourly rate and the minimum hourly guaranty is the regular rate in that week."

The regulation's variant of the same example: if the worker above was guaranteed $11 an hour for productive working time, the 46 productive hours pay $506 instead of $491. In a week with no waiting time involved, the worker would be owed an additional $5.50 (half time) for each of the 6 overtime hours, bringing the total to $539 — 46 hours at $11 plus 6 hours at $5.50. One more sentence from the same paragraph: if waiting time is paid at a different rate, the regular rate is the weighted average of the two hourly rates, as discussed in § 778.115.

The other legal method — agreed in advance

There is an alternative, under section 7(g) of the Act and 29 CFR § 778.418. A worker and employer may agree in advance of the work that pieces produced during overtime hours will be paid at not less than one and one-half times the piece rate, instead of running the weekly regular-rate calculation. If every condition is met, no additional overtime pay is due. Section 778.418's conditions:

Two more rules ride on top of it. Section 778.418(c): if a pieceworker works at two or more kinds of work with different piece rates, the overtime rate for each kind of work is one and one-half times whichever piece rate applies to the work performed during the overtime hours, and every test still has to be met. And § 778.417 states the general requirements for any section 7(g) method: first, the employee's average hourly earnings for the workweek (not counting overtime pay or pay excluded from the regular rate) must not be less than the minimum wage — the method may not be used to pay subminimum straight-time rates and make it up in overtime hours; second, extra overtime compensation must still be properly computed and paid on other additional pay that belongs in the regular rate, such as bonuses.

One honest limit — bonuses earned over several weeks

Section 778.111(a) puts a week's production bonuses into that week's total, and that is what this page prints. A bonus earned across several weeks raises a further question — how it is spread back over the weeks it was earned in — and that method lives in a different regulation section that this page's sources do not state, so this page does not state it either. If a multi-week bonus is the heart of your question, it is a question for the Wage and Hour Division (1-866-487-9243). This series' separate page, "Do Bonuses Count in Overtime Pay?", covers what enters the regular rate.

The bottom line: piece pay changes the arithmetic, not the right. The standard method turns the whole week's earnings into one hourly rate (total earnings ÷ total hours) and adds half that rate for each hour past 40, because straight time is already inside the piece earnings. The only alternative is an advance agreement to pay at least time and one-half the piece rate on pieces made during overtime hours — with the conditions above, including a bona fide rate and a week's average earnings that still clear the minimum wage.

General information only — this page is not legal advice.

Sources

29 CFR § 778.111, "Pieceworker" (eCFR) — paragraph (a): the regular hourly rate is total earnings for the workweek from piece rates and all other sources (such as production bonuses) plus any sums paid for waiting time or other hours worked (except statutory exclusions), divided by the number of hours worked in the week; for overtime the pieceworker is entitled to the total plus one-half the regular rate for each hour over 40; only additional half-time is required because straight-time compensation has already been received for all hours worked; the worked example (50 hours; $491 piece earnings for 46 productive hours + $8.00 an hour for 4 waiting hours = $523.00; ÷ 50 = $10.46 regular rate; 10 overtime hours × $5.23 = $52.30; total $575.30). Paragraph (b): piece rates with a minimum hourly guarantee — where piece earnings fall short, the guarantee is paid and is that week's regular rate (the $11-an-hour variant: $506 for the 46 productive hours; +$5.50 for each of 6 overtime hours; total $539); a different waiting-time rate produces a weighted average under § 778.115. Read in full November 7, 2026. https://www.ecfr.gov/current/title-29/section-778.111

29 CFR § 778.418, "Pieceworkers" (eCFR) — the section 7(g) alternative: by advance agreement, pieces produced during overtime hours may be paid at not less than one and one-half times the piece rate, with no additional overtime due if the stated conditions are met (bona fide rate; overtime hours qualifying under section 7(e)(5), (6), or (7); overtime hours paid at the overtime rate equal to or exceeding the hours over the maximum-hours standard; overtime-hours compensation at least one and one-half times the applicable minimum rate for the total overtime hours); paragraph (b)'s bona fide definition (the rate actually paid for nonovertime work, sufficient to yield at least the minimum wage per hour); paragraph (c)'s two-or-more-piece-rates rule. Read in full November 7, 2026. https://www.ecfr.gov/current/title-29/section-778.418

29 CFR § 778.417, "General requirements of section 7(g)" (eCFR) — the two general requirements for any section 7(g) computation: the employee's average hourly earnings for the workweek (exclusive of overtime pay and excluded pay) must not be less than the minimum wage; and extra overtime compensation must be properly computed and paid on other forms of additional pay required to be included in the regular rate, such as bonuses. Read in full November 7, 2026. https://www.ecfr.gov/current/title-29/section-778.417

U.S. Department of Labor, Wage and Hour Division — Fact Sheet #23 states the same basis rule in one sentence, quoted in its Requirements section: "Earnings may be determined on a piece-rate, salary, commission, or some other basis, but in all such cases the overtime pay due must be computed on the basis of the average hourly rate derived from such earnings." Read in full November 7, 2026. https://www.dol.gov/agencies/whd/fact-sheets/23-flsa-overtime-pay

Checked November 7, 2026.

Related guides: Do Bonuses Count in Overtime Pay, Can My Employer Force Me to Work Overtime, I Live Where I Work, Do I Get Paid for Putting On My Work Gear and Can My Employer Give Me Comp Time Instead of Overtime Pay.