Answered Plainly
Display: Text size:

Leer esta guía en español

My Dog Got Skunked: What to Do First

Short answer: Keep the dog outside if you can, check the eyes first, and do not hose the dog down with plain water — water spreads the spray and makes the smell stronger. Mix this fresh, in an open container: 1 quart of 3% hydrogen peroxide + ¼ cup baking soda + 1 to 2 teaspoons dish soap. Work it into the dry coat, keep it out of the eyes, let it sit 5 to 10 minutes, rinse, then shampoo. Tomato juice does not work. Spray straight in the eyes or mouth, or any actual bite, means a veterinarian right away — and watch the dog for the next few days for the rare but serious blood problem described below.

General information only — this page is not veterinary advice. Most skunked dogs need a bath, not a hospital. But the exceptions below are real, and if your dog matches one of them, skip the bath and call a veterinarian or an emergency animal hospital first.

Call the vet first — before any bath — if…

One practical note from the AKC: most vet clinics would rather you call ahead before bringing in a skunked dog — the smell fills the building. The exception is an eye emergency, which is exactly the case above.

The steps, in order

  1. Keep the dog outside while you get ready, if you can. Cornell's warning: the oily spray soaks into fabric, carpet, and furniture and is very hard to get out — every minute indoors spreads the job.
  2. Check the eyes. Look for redness, swelling, heavy tearing, or squinting. If the eyes look irritated, flush them with sterile saline, per the AKC's veterinary advice. Direct spray to the eyes is the vet-first case above — do that instead of bathing.
  3. Do not rinse the dog with water first. The smell compounds in skunk spray (called thiols) do not dissolve in water, even soapy water — a plain rinse mostly spreads them around, and the AKC notes the spray becomes especially potent when it meets water.
  4. Mix the solution fresh: 1 quart (4 cups) of 3% hydrogen peroxide, ¼ cup of baking soda, and 1 to 2 teaspoons of dish soap, in an open container. Use it right away. Never mix it ahead of time and never store it in a closed bottle — the AKC warns a sealed container of this mixture can burst.
  5. Work the solution into the dry coat all over the sprayed areas, carefully keeping it away from the eyes. Let it sit 5 to 10 minutes.
  6. Rinse thoroughly. If the smell is still strong, repeat the solution once more — then, and only then, wash the dog with regular dog shampoo to clear out the residue. Cornell and the AKC agree on the order: deodorizer first, shampoo after.
  7. Dry the dog well, and keep it off the furniture until the job is done.

Store-bought option: commercial skunk removers (Cornell names products such as Skunk-Off and Nature's Miracle) do the same job without peroxide — which means no coat-color change (below). Follow the bottle's directions.

Why this works — and why water and tomato juice don't

Cornell's explanation, in plain words: skunk spray's smell comes from sulfur chemicals called thiols. They are not water-soluble, so water and ordinary soap cannot wash them away. The baking soda and hydrogen peroxide mixture changes the thiols chemically into sulfonates, which do dissolve in water — so they rinse out instead of just moving around.

Some of the spray turns into related compounds (thioacetates) that change back into thiols when they get wet. That is why a dog that was sprayed can smell fine dry and start smelling like skunk again in the rain, for months afterward. It is also another reason the neutralizing step matters more than the rinsing.

Tomato juice does not neutralize skunk spray. The AKC is direct: tomato juice masks the odor briefly but does not neutralize the sulfur compounds, and the smell returns. Vinegar is the same story — a brief cover-up, not a fix. Both are kitchen myths with decades of momentum; the peroxide mixture is the one that changes the chemistry.

Warnings that come with the recipe

Keeping it from happening again

The bottom line

Eyes first, dog outside, no plain-water rinse. Mix the peroxide, baking soda, and dish soap fresh, use it on the dry coat for 5 to 10 minutes, rinse, then shampoo. Watch the dog for a few days afterward for weakness or brown-looking gums, and treat any eye spray or bite as a vet trip, not a bath. General information only — not veterinary advice.

Sources

Cornell University College of Veterinary Medicine, Riney Canine Health Center — the skunked-dog guidance: most cases handled at home; direct eye or mouth spray needs immediate veterinary care; the rare red-blood-cell damage (Heinz body anemia / methemoglobinemia) can appear a few hours to 24 hours after a heavy spraying, with monitoring advised for 1 to 3 days; thiols are not water-soluble, and the baking-soda/peroxide mixture oxidizes them into water-soluble sulfonates; peroxide can lighten black fur to bronze; smell can return when fur gets wet for months; rabies caution; prevention steps. Read in full. https://vet.cornell.edu

American Kennel Club — "How to Get Skunk Smell Off Your Dog," with Dr. Ashly Smith of Small Door Veterinary: the recipe (1 quart 3% hydrogen peroxide + ¼ cup baking soda + 1 to 2 teaspoons dish soap), apply to the coat avoiding the eyes, let sit 5 to 10 minutes, rinse, then shampoo; check and flush eyes with sterile saline; use the mixture immediately and never store it in a closed container (explosion risk); never stronger than 3% peroxide; tomato juice and vinegar mask but do not neutralize; avoid bleach, ammonia, and strong household cleaners; do not wet the dog before the neutralizer; call the clinic ahead; prevention at dawn and dusk. Read in full. https://www.akc.org/expert-advice/health/dog-sprayed-by-skunk/

Checked November 7, 2026.

Related guides: How Much Water Should a Dog Drink a Day, How Often Should You Bathe a Dog, How to Tell If Your Dog Has a Fever, Introducing a Cat and a Dog and Why Does My Dog Eat Poop? (Coprophagia).