How to Read a VIN, in Plain Words
The short answer: A VIN — vehicle identification number — is a 17-character code stamped on every car. A federal rule, 49 CFR Part 565, fixes what each block means: positions 1–3 say who made it, 4–8 describe the vehicle, 9 is a check digit that catches typos, 10 is the model year, 11 is the factory, and 12–17 are the car's own serial number.
Where to find it
The rule requires the VIN for cars and light trucks to sit inside the passenger compartment, readable through the windshield from outside the vehicle, next to the left windshield pillar — in plain terms, the plate at the driver's-side corner of the dashboard, read by standing outside and looking in (Section 565.13, part f). The same number is printed in your paperwork too: an Oklahoma insurance security verification form, for example, lists your vehicle's year, make, model and VIN (Title 47, Section 7-601.1).
The letters that never appear
A VIN uses only the letters in this set — ABCDEFGHJKLMNPRSTUVWXYZ — plus the digits 0–9 (Section 565.13, part g). The letters I, O and Q are left out: those are the ones that look like 1 and 0. If you are copying a VIN and think you see an I or an O, you are almost certainly looking at a 1 or a 0.
Block by block
- Positions 1–3 — who made it. This first section “shall uniquely identify the manufacturer and type of the motor vehicle” (Section 565.15, part a). Assignments are coordinated for NHTSA (Section 565.16, part a). Decoder charts commonly read the first character as a country or region code; that reading comes from the worldwide identifier system behind these assignments, not from the text of Part 565 itself. One wrinkle: a small maker (fewer than 1,000 vehicles of a type per year) is identified by positions 1–3 together with positions 12–14, and a “9” in position 3 is the flag that this longer identifier is in use.
- Positions 4–8 — what it is. For a passenger car, this section must make these things decipherable: make, line, series, body type, engine type, and all restraint devices and their location (Section 565.15, part b, Table I). Each maker arranges these five characters its own way, which is why this block cannot be read from a universal chart — you need the maker's own key, which the maker is required to file with NHTSA (Section 565.16, part c).
- Position 9 — the check digit. A single digit 0–9, or the letter X, computed from all the other characters by a fixed formula printed in the rule itself (Section 565.15, part c). Its only job is catching a mistyped VIN. The rule's own worked example: the sample VIN's characters add up, under the formula, to 411; 411 divided by 11 leaves a remainder of 4/11, so the check digit is 4.
- Position 10 — the model year. One character from the rule's year table (Section 565.15, part d, Table VII). The codes repeat every 30 years, and for cars and light trucks position 7 is the tie-breaker: if position 7 is a number, the year is in the 1980–2009 range; if it is a letter, the year is in the 2010–2039 range (the note to Table VII).
- Position 11 — the factory. This character “shall represent the plant of manufacture” (Section 565.15, part d).
- Positions 12–17 — the serial number. “The number sequentially assigned by the manufacturer in the production process” (same part). For cars and light vehicles, the last five characters of the VIN are always numbers. No two vehicles built within a 60-year span starting with 1980 may carry the same VIN (Section 565.13, part d).
The year codes (2010–2039)
| Code | Year | Code | Year | Code | Year |
|---|---|---|---|---|---|
| A | 2010 | L | 2020 | 1 | 2031 |
| B | 2011 | M | 2021 | 2 | 2032 |
| C | 2012 | N | 2022 | 3 | 2033 |
| D | 2013 | P | 2023 | 4 | 2034 |
| E | 2014 | R | 2024 | 5 | 2035 |
| F | 2015 | S | 2025 | 6 | 2036 |
| G | 2016 | T | 2026 | 7 | 2037 |
| H | 2017 | V | 2027 | 8 | 2038 |
| J | 2018 | W | 2028 | 9 | 2039 |
| K | 2019 | X | 2029 | ||
| Y | 2030 |
In this table the year code is never I, O, Q, U or Z, and never 0. The digits 5–9 also served the 2005–2009 years, in the earlier cycle.
Decode yours free — from the government
NHTSA, the federal safety agency, runs a free VIN decoder at vpic.nhtsa.dot.gov/decoder (linked from its VIN Decoder page at nhtsa.gov). Type in the full VIN, click Decode VIN, and read the results; the build plant and country are listed at the bottom of the result page. It works for any brand because the law makes every manufacturer send NHTSA the information needed to decipher its VINs (Section 565.16, part c). NHTSA notes that the information the decoder shows is reported by the manufacturer — questions about a specific field go to the maker.
What a VIN cannot tell you
The code only holds what was built into the number at the factory: who made the vehicle, how it was built, when, where, and its place in the production line. Accidents, owners, repairs and mileage are not characters in the code, so no decoder can read them out of it. Sites that sell “VIN history” reports are pulling those facts from other records, not from the 17 characters.
Sources
49 CFR Part 565, subpart B (Sections 565.10 through 565.16, including Tables I through VII), read in full on eCFR, the official Code of Federal Regulations site; and NHTSA's VIN Decoder page (nhtsa.gov), read in full, which gives the decoder's address and the plant-of-manufacture steps quoted above. The Oklahoma insurance-form detail is from Title 47, Section 7-601.1, read in full in the official Title 47 compilation (oklegislature.gov). Commercial decoder sites were read for comparison; every fact on this page rests on the regulation or NHTSA, not on them.
Checked November 7, 2026.
Related guides: How Old Is Too Old for Tires? The 6-to-10-Year Range, What Is a Black Tag in Oklahoma, Fake Insurance Verification Forms in Oklahoma, Odometer Rollback and Oklahoma Disability Parking Placard.